A5 OAW forward cluctch slip

Benutzeravatar
Horch
Chef
Chef
Beiträge: 4128
Registriert: Mo 16. Jun 2014, 15:57
9
Auto: Audi A6 4B 2,5TDI
Motorkennbuchstabe: AYM
Getriebekennbuchstabe: FSC
Hat sich bedankt: 0
Danksagung erhalten: 14 Mal

Re: A5 OAW forward cluctch slip

Beitrag von Horch »

Bonjour,

have you also changed the entrainment pump? If so, open the hydraulic unit and check the micro-sieves. And also check the pressure relief valve in the gear body.

Salut,

Horch
Der Optimist sieht in jedem Problem eine Aufgabe. Der Pessimist sieht in jeder Aufgabe ein Problem.
*** Bitte auch den [External Link Removed for Guests] des Portals beachten und bei Zufriedenheit betätigen ***
xav_g
Fahrer
Fahrer
Beiträge: 11
Registriert: So 10. Nov 2019, 20:25
4
Auto: Audi A5 2.7TDI 2008
Motorkennbuchstabe: CAMA
Getriebekennbuchstabe: LAU
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: A5 OAW forward cluctch slip

Beitrag von xav_g »

Hallo,

I have just remove the pump for see if i can see a problem, the pump was clean.

The entrainment are ok, for reverse gear i have no problem, i think the pump is ok.

Where i can find manual for disassemble hydraulic unit?

If pressure relief valve have a problem, i don t have error message?

Danke
Benutzeravatar
Horch
Chef
Chef
Beiträge: 4128
Registriert: Mo 16. Jun 2014, 15:57
9
Auto: Audi A6 4B 2,5TDI
Motorkennbuchstabe: AYM
Getriebekennbuchstabe: FSC
Hat sich bedankt: 0
Danksagung erhalten: 14 Mal

Re: A5 OAW forward cluctch slip

Beitrag von Horch »

The most critical point of the entrainment pump is the connection to the oil pipe, which is suppling the forward clutch. The entrainment pump has nothing to do with the reverse clutch. Pay also attention to the sealing ring of the entrainment pump. It should be installed with the closed side to the input shaft.

And in fact, there is no manual to disassemble and maintain the hydraulic unit. Just remove the pressure pump and open all backside screws. Be aware of small springs and/or sieves. Sieves should be carefully handled as these are not available as spares. Sieves can be cleaned best way by an ultrasonic cleaner.

Regards,

Horch
Der Optimist sieht in jedem Problem eine Aufgabe. Der Pessimist sieht in jeder Aufgabe ein Problem.
*** Bitte auch den [External Link Removed for Guests] des Portals beachten und bei Zufriedenheit betätigen ***
xav_g
Fahrer
Fahrer
Beiträge: 11
Registriert: So 10. Nov 2019, 20:25
4
Auto: Audi A5 2.7TDI 2008
Motorkennbuchstabe: CAMA
Getriebekennbuchstabe: LAU
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: A5 OAW forward cluctch slip

Beitrag von xav_g »

Thank you for your help.

I will teardown and check the hydraulic unit in first.

I find a video to open gearbox: [External Link Removed for Guests]
xav_g
Fahrer
Fahrer
Beiträge: 11
Registriert: So 10. Nov 2019, 20:25
4
Auto: Audi A5 2.7TDI 2008
Motorkennbuchstabe: CAMA
Getriebekennbuchstabe: LAU
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: A5 OAW forward cluctch slip

Beitrag von xav_g »

Hallo

I have disassemble the hydraulic unit, all are clear, i will be use a ultrasonic cleaner to be sure.

The pressure relief valve is in the variator compartment?



Bild

Bild

Bild
Bilman
Newbie
Newbie
Beiträge: 1
Registriert: Mi 9. Sep 2020, 12:17
3
Motorkennbuchstabe: AG3
Getriebekennbuchstabe: S166
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: A5 OAW forward cluctch slip

Beitrag von Bilman »

xav_g hat geschrieben: Do 5. Dez 2019, 15:30 Hallo

I have disassemble the hydraulic unit, all are clear, i will be use a ultrasonic cleaner to be sure.

The pressure relief valve is in the variator compartment?



[External Link Removed for Guests]

Bild

Bild
Sure
cristianchp
Newbie
Newbie
Beiträge: 1
Registriert: Mi 30. Dez 2020, 08:26
3
Auto: AUDI A6 2.0 TDI MULTITRONIC
Motorkennbuchstabe: CGU
Getriebekennbuchstabe: NSL
Hat sich bedankt: 0
Danksagung erhalten: 0

Re: A5 OAW forward cluctch slip

Beitrag von cristianchp »

Hallo, ich sehe, dass dieses Problem häufig auftritt. Das gleiche passiert mir in einem Audi A6 mit der NSL-Box. Wir haben die Kupplungen gewechselt und es macht genau das Gleiche. Wir haben auch die Druckplatte und das Rohr gewechselt, aber es macht das Gleiche. Können Sie sagen, wie Sie das Problem am Ende gelöst haben?
Benutzeravatar
lubusch
Moderator
Moderator
Beiträge: 4796
Registriert: So 26. Jan 2014, 23:14
10
Auto: Audi A4 Cabrio 8H7 B6 3.0 V6 162Kw Bj.2003 ,Multitronic
Motorkennbuchstabe: ASN
Getriebekennbuchstabe: FRY
Wohnort: Beverstedt OT Lunestedt
Hat sich bedankt: 16 Mal
Danksagung erhalten: 56 Mal

Re: A5 OAW forward cluctch slip

Beitrag von lubusch »

Hello
Did you replace a new clutch, pressure plate and piston?
If so, then you have to measure it again.
Gruß Manfred
Der Optimist ist ein Mensch, der glaubt, dass eine Stubenfliege einen Weg nach draußen sucht.
*** Bitte auch den "Spendenknopf" des Portals beachten und bei Zufriedenheit betätigen ***
VCDS HEX-CAN-USB Raum 27616 Niedersachsen
Antworten